Hot Drink Setup HotCup Operators’ Guide
6740001 54 November, 2007
SET THE BOWL RINSE TIME
Mixing bowl(s) can be automatically rinsed by one of two methods: You can specify a set time of day
when the bowl is rinsed, or you can specify that rinsing takes place a set time after the last selection
is vended.1.
a. Press then until the display shows one of the following:
RIN.HRS 2.5 - This is how soon the machine rinses the bowls after a vend. In this example,
bowl rinse takes place 2.5 hours after the last vend. Range: 2.0 - 12.5 hours, in .1 hour (6
minute) increments.
-or-
RIN.TIM 4.5 - The time of day (in hours and tenths of hours) the machine rinses the bowls.
In this example, bowl rinse takes place at 4:30 am. Range: 0.0 - 23.9 in .1 hour (6 minute)
increments.
NOTE:
If 24 hours passes without a vend, no rinsing will take place. This
eliminates unnecessary rinsing over a weekend or holiday.
-or-
RINSE OFF - No bowl rinse takes place.
b. Press to switch between these options, and the number keys to enter new values.
c. Continue.
CLEAR TANK ERRORS AND FILL THE TANK
a. Press , then press until the display shows TANK FIL L.
b. Press . This clears any tank error and starts filling the tank, if necessary. If it is taking
a long time to fill the tank AND THERE ARE NO LEAKS, you may see TANK ERR in the
diagnostic list again. Just press again after making sure there are no other problems,
such as a restriction in the water inlet line or a clogged water filter.
c. Continue.