Programming The HotCup HotCup Operators’ Guide
6740001 34 November, 2007
Programming The HotCup
I. GETTING AROUND
Getting around the HotCup software is pretty easy once you know the features that are available to
you, and how to use them. The three main parts you will use are the SERVICE KEYPAD, the
SELECTION SWITCH PANEL, and the DISPLAY.
II. THE SERVICE KEYPAD
For most of your programming jobs, you will be using
the service keypad conveniently located on the
monetary panel. The service keypad has 16 keys. The
three columns on the left are the mode keys. The right
hand column contains the movement keys.
III. THE SELECTION SWITCH PANEL
The selection switch panel is also located on the monetary panel.
Unlike the service keypad, it is accessible when the cabinet door is
closed. These are the keys the customer will use to make selections.
You can also use these keys during programming procedures.
ABC
DEF
GHJ
636P0044
XYZ