Messages HotCup Operators’ Guide6740001 76 November, 2007
ENTERING YOUR MESSAGE
You will be using a combination of special keys and the keys on the selection switch panel to enter
your message. Pressing the keys on the selection switch panel will enter the character shown on
that key. Most of the keys on the service keypad have a special purpose to help you create and edit
your messages:
THE CHARACTER SET
Inserts an R at the flashing
character. Inserts a space at the
flashing character.
Inserts an S at the flashing
character.
Deletes the current
character and closes up the
space.
Inserts a T at the flashing
character.
Deletes the current
character and leaves the
space.
Repeats the letter to the left
of the flashing character. Enters the special "end of
message" character, which
denotes the end of the
message.
"Pages" through the
message, ten characters
(one screen) at a time.
Steps forward and backward through the message, one
character at a time.
Steps forward and backward through the character list,
one character at a time.
0Aku[>
1bl v] ?
2cmw#@
3dnx °
4eoy+
5f pz-
6gq (Space)/
7hr- .
8i s$<
9j t ‘=
THIS IS THE END OF
MESSAGE CHARACTER.