Monetary Setup HotCup Operators’ Guide
6740001 44 November, 2007
d. Press to display the desired choice.
The value of "X.XX" has two purposes:
i. First, "X.XX" tells the machine how big a bill or coin to accept even though there is not
enough change in the coin mech to cover all possible paybacks.
• For example, enter 1.00. The machine will take a dollar bill or coin even though there
is less than $1.00's worth of change. Entering 5.00 tells the machine to take a five
even though there is less than $5.00's worth of change, and so forth.
NOTE:
This could cause a customer to be shortchanged.
• Entering 0.00 means that bills or coins will only be accepted if there is enough change
to cover them.
ii. The value of "X.XX" tells the machine how much the customer is allowed to overbuy a
product. The customer will be shortchanged when an overbuy occurs.
• For example, for a value of $0.25: if there is no change in the machine and the
customer inserts a $1.00 bill. The customer can purchase a product for $0.75 even
though the change cannot be paid back. The customer will be shortchanged.
Normally a purchase will not be approved unless all change can be paid.
• Entering 0.00 means that the vend will only be approved when the correct change can
be returned (overbuy disabled).
e. CONTINUE.
SELECT CARD READER AND OPTIONS
a. Press , then press until the current card reader is shown in the display.
b. Press to choose the desired card reader. Your choices are: NO CARD, DUMB
CARD, or MDB CARD.
c. Press until one of the following is displayed:
REVALUE.ON Allows credit to be transferred onto the card
REVALUE.OFF Credit cannot be transferred to the card
d. Press to display the desired choice.
e. CONTINUE.