HotCup Operators’ Guide Monetary Setup
November, 2007 43 6740001
INITIAL SETUP OF A NONSTANDARD BILL VALIDATOR
a. Connect the bill validator, select MDB in the bill validator selection screens. The standard
"MDB.1.2.5.10.20" screen will appear first. Exit the bill validator setup by pressing .
Bill information is now collected from the validator. Re-enter the bill validator selection screen
and the nonstandard screen "MDB. <*>" will appear.
PULSE DBV The pulse bill validator will accept $1 bills. Press to choose the
desired option.
b. CONTINUE.
SELECT MONETARY OPTIONS
This function lets you:
Set declining balance,
Set currency acceptance on low change,
Set overbuy options,
Set last bill stacking options
a. Press , then press until one of the following is displayed:
DECLINE.ON - More than one vend is allowed, with a declining balance.
OR
DECLINE.OFF - A declining balance is not allowed.
b. Press to display the desired choice.
c. Press until one of the following is displayed:
ACC <$$ X.XX The last bill which meets or exceeds maximum price will be held in escrow.
OR
ACC.STK X.XX The last bill which meets or exceeds maximum price and MDB coupon
bills (token bills) will be immediately stacked.
Example: If setting is ACC.STK 1.00 and maximum price is $1.50. This setting will
immediately stack the second $1.00 bill inserted.
Once Credit is established, multiple vends may
occur until the coin return is pressed
Declining
Balance