Initial Setup HotCup Operators’ Guide
6740001 32 November, 2007
4. Adjust the Cup Mechanism.
a. Place seven cups in the cup ring.
b. Observe the clearance as shown in view B.
c. If necessary adjust by first loosening the adjustment arm screw (view A).
d. Move adjustment arm until correct clearance is achieved.
e. Hold adjustment arm in place and tighten adjustment arm screw.
ADJUSTED
TOO LOOSE
ADJUSTED
TOO TIGHT
ADJUSTMENT
ARM
LOOSEN SCREW
MOVE ARM
CORRECT
ADJUSTMENT
CUP
CAM
CUP
CAM
Thisclearance is just
largeenough to allow
cupejection
Thisside is snug
againstcam
316P0118
View AView B