Time Setup HotCup Operators’ Guide
6740001 72 November, 2007
TIME INTERVAL EDITING
You can select up to four times of day for each special vending period.
NOTE
If two or more of these time periods overlap, the interval
with the highest priority will overrule the other(s).
This order of precedence is:
1. INHIBIT
2. FREEVEND
3. DISCOUNT
For example, if a DISCOUNT time period is scheduled before the
end of an INHIBIT time period, DISCOUNT does not begin until the
INHIBIT interval has ended.
The time interval editing procedure is almost the same for the INHIBIT, FREEVEND, and DISCOUNT
intervals. There is one difference for the DISCOUNT time interval, so that interval will be shown
here.
a. The display shows DISCT 1234 Press the number of the time interval you want to edit, or
to edit time interval 1 (we'll use interval 1 for this example).
b. The display shows 1.DISCT ON or 1.DISCT OFF. This display tells you whether your time
interval (represented by X) is on or off. Press to change the status of the time interval.
NOTE
If you turn an interval ON, it must be edited. You can edit a time
interval now, then turn it OFF until later.
c. Press . The display shows 1.DSCT XX This is the discount percentage for this
period. Enter a discount percentage of 25 with the number keys.
d. Press . The display shows 1.STRT X.XX "X.XX" is the currently set start time.
Enter a new start time (24-hour format) for this interval. To enter the time for 3:30 pm, enter
1530.
e. Press . The display shows 1.STOP X.XX. "X.XX" is the currently entered stop time.
Enter a new stop time (24-hour format) for this interval. To enter a stop time of 6:00 pm, enter
1800. You have now established a 25% discount that starts at 3:30 pm and ends at 6:00 pm.
f. Press . The display shows 1.@ - - - - - - -. The dashes represent the days that this
time interval is active. Pressing number keys 1 through 7 switches the days on/off. The days
you select will appear in the display. Press 2, 4, and 6. The display shows 1.@ - M - W - F
-, meaning that the discount interval is only active on Monday, Wednesday, and Friday.