View Machine Info HotCup Operators’ Guide
6740001 86 November, 2007
VIEW AMOUNT IN VALIDATOR
(not shown if zero)
a. Press , then press until the display shows DBV XX.XX.
"XX.XX" is the dollar amount in the bill stacker.
b. Press to show the quantities of bills in the stacker. For example, the display shows
$0120, meaning that there are 20 dollar bills in the bill stacker. Press again to show
the quantities of other bills, such as $5s, $10s, or $20s.
c. CONTINUE.
VIEW DIAGNOSTIC MESSAGES
a. Press . The display shows any of the following diagnostic messages, depending upon
any fault(s) present:
NO ERRORS None of the following errors are detected:
KEYPAD xy Key(s) x, y stuck.
ROM ERROR Key(s) x, y stuck.
RAM ERROR RAM is not initialized or is not compatible with the currently loaded
software. If this message appears, initialize your RAM by
performing the following procedure:
NOTE:
Initializing RAM will erase all your data and drink settings. Be
sure you have written this information down before continuing.
b. Press and hold until two beeps are heard, and the display shows FINISHED.