HotCup Operators’ Guide Appendix C

November, 2007 C-1 6740001
Appendix CDEX/UCS Interface Operation
Connect your portable data collection device (PDCD) to the harness hanging inside the monetary
door, and operate it per its instructions.
SELECT DATA TRANSFER METHOD:
1. Press . The display shows: ENTER CODE . You must enter the four-digit supervisor
code within 6 seconds to gain access.
NOTE
A new machine has a factory-set supervisor code of 0000.
2. When you have entered the right code, you will hear two beeps and see SUPERVISOR in the
display.
3. Press until the display shows DEX.CLR ON or DEX.CLR OFF.
DEX.CLR ON = Data will be cleared after collection is complete.
DEX.CLR OFF =Data will remain in merchandiser memory after collection is complete.
4. Press to switch between the two options.
5. Press to exit.
This procedure does not need to be repeated unless you desire to change the data transfer option.
However, it might be prudent to check the setting prior to download to ensure unintentional clearing
of data.
DOWNLOAD DATA:
Press . The display shows DEX.MODE while data is being transferred.