o
o Connector removal tool
o Display bezel removal tool
o Diagnostics software
4.2.2 Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations.
IMPORTANT: As each subassembly is removed from the computer, it should be placed away from the work area to prevent damage.
4.2.3 Cables and Connectors
Cables must be handled with extreme care to avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal from the connector. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing the cables, and ensure that the cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When servicing this computer, ensure that cables are placed in their proper location during the reassembly process. Improper cable placement can damage the computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Cables
Use the following precautions when handling cables to avoid damage to the cable or computer:
o Always handle cables by their connectors.
o Avoid bending, twisting, or pulling on the cables.
o Apply minimum required force when seating or unseating the cables from their connectors.
o Place the cables in such a manner that they cannot be caught or snagged by parts being removed or replaced.
o Handle flex cables with extreme care; they can tear easily.
ZIF Connectors