Chapter 6.3 Preparing the MultiBay Expansion Base for Disassembly

NOTE: It is important that these instructions be followed when installing a new expansion base top cover (Service Spare Part Number 213711-003).

1.Do not remove the plastic hole cover.

2.Discard the fan.

Before beginning removal and replacement procedures, complete the following steps:

1.Undock the computer from the expansion base (Section 5.3.1).

2.Disconnect AC power and any external devices (Section 6.3.1).

3.Remove the battery pack(s) (Section 6.3.2).

4.Remove the mass storage devices (Section 6.3.3).

5. Remove any PC Cards (section 6.3.4).