Installing a Device in the MultiBay

Installation of a device in the MultiBay is the reverse of the removal procedure. To install a device in the MultiBay, complete the following steps:

1.Insert the device, with the label facing up and the connector/contacts facing the inside of the bay (Figure 5-13).

2.Push firmly on the device; it will lock into place.

3.Install the security screw (optional) as shown in Figure 5-12.

5.3.7 PC Card

Compaq recommends that you remove any installed PC Cards (PCMCIA) before performing any service on the computer. To remove a PC card, complete the following steps:

1.Open the PC Card door [1] (Figure 5-14).

2.Press on the PC Card release button [2] to remove the PC Card (Figure 5-14).