Faulty refresh | A continuous read/write test of port | 1 | |
circuits | 61h found | that bit 4 (Refresh Detect) |
|
| failed to | toggle within an allotted |
|
| amount of | time. |
|
Interrupt controller | A sequential read/write of various | 5 | |
failed | Interrupt | Controller registers failed. |
|
ROM checksum incorrect | A checksum of the ROM BIOS does not | 2 | |
| match the | byte value at F000:FFFF. |
|
RAM error at location | RAM error | occurred during memory test. | None |
xxxx |
|
|
|
Parity error at | Parity error occurred. | None | |
unknown location |
|
|
|
=========================================================================== |
The following table lists some of the Fatal Error beep codes, along with the beep sequence (short, long, pause) and the meaning of the beeps.
Table
===========================================================================
Beep Code Beep Sequence ExplanationRemedy
===========================================================================
0 | The DMA page | Replace system board. | |
|
| registers are faulty. |
|
1 | The refresh circuitry | Replace system board. | |
|
| is faulty. |
|
2 | The ROM checksum is | 1. Flash the ROM | |
|
| incorrect. | 2. Replace system |
|
|
| board. |
3 | The CMOS RAM test | Replace system board. | |
|
| failed. |
|
4 | The DMA controller is | Replace system board. | |
|
| faulty. |
|
5 | The interrupt | Replace system board. | |
|
| controller failed. |
|
6 | The keyboard | Replace system board. | |
|
| controller failed. |
|
7 | Graphics adapter is | Replace system board. | |
|
| faulty. |
|
8 | Internal RAM is | Replace processor | |
|
| faulty. | board. |
S = Short, L = Long, P = Pause
===========================================================================