2. Move the sliding panel on the front of the battery to the left.
Installing a Battery Pack
To install a battery pack into a MultiBay, complete the following steps:
1.With the label facing up and the connectors facing in, align the left side of the battery pack with the left side of the MultiBay, and push the battery pack into the MultiBay until it is seated.
2.Move the sliding panel on the front of the battery pack to the right to cover the MultiBay opening.
6.3.4 Mass Storage Devices
Removing a Mass Storage Device
To remove mass storage devices from the expansion base, complete the following steps:
1.Save and close any files that reside on the drive that is to be removed.