Germany

VDE

1

Italy

IMQ

1

Japan

JIS

3

Norway

NEMKO

1

Sweden

SEMKO

1

Switzerland

SEV

1

United Kingdom

BSI

1

United States

UL

2

---------------------------------------------------------------------------

NOTES 1: The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0

mm2 conductor size. Power cord set fittings (appliance coupler

and wall

plug) must bear the certification mark of the agency

responsible for evaluation in the country where it will be used.

2:The flexible cord must be Type SJT or equivalent, No. 18 AWG,

3-conductor. The wall plug must be a two-pole grounding type with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A 250V) configuration.

3:The appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCT or VCTF,

3-conductor, 0.75mm2 conductor size. The wall plug must be a two-pole grounding type with a Japanese Industrial Standard C8303

(15A, 125V) configuration.

===========================================================================

Appendix B.2 2-Conductor Power Cord Set

The wide-range input feature of your computer permits it to operate from any line voltage between 100 to 240 volts AC.

The power plug or power cord set (appliance coupler, flexible cord, and wall plug) you received with your computer meets the requirements for use in the country where you purchased your computer.

Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requirements, contact your Compaq authorized dealer.

General Requirements

The requirements listed below are applicable to all countries:

1.The length of the power cord set must be at least 6.00 feet (1.8 m) and a maximum of 9.75 feet (3.0 m).

2.All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used.