Installing the Auxiliary Battery

The auxiliary battery is not cylindrical but protrudes along one side. When installing the auxiliary battery, this side of the battery must enter the battery compartment first. To install an auxiliary battery, complete the following steps:

1.Remove the auxiliary battery compartment door if it is not already off (Figure 5-7).

2.Plug the auxiliary battery cable into the connector in the rear of the compartment (Figure 5-8).

3.Insert the auxiliary battery into the compartment, remembering that the side of the battery that protrudes must enter the compartment first (Figure 5-9). The battery compartment door will not close if the battery is inserted improperly.