Concord Camera Eye-Q Go LCD Camera Changing the TV Mode setting, Connecting to the television

TV Mode

The Concord Eye-Q Go LCD camera allows you to view stored files and to record clips on your television. To begin, check your television documentation to determine what video standard you should set your camera to, either NTSC or PAL.

MAIN MENU
B r i g h t n e s s
S e t u p	+
E x i t

SETUP
Time - out	30S
Driver	HDD
TV	NTSC
Language

Changing the TV Mode setting:

1.In the Setup menu press until TV is highlighted

2.Press to change the setting to NTSC or PAL.

Connecting to the television:

1.Connect the AV cable supplied with your camera into the jack marked VIDEO or VIDEO IN on your television.

2.Turn on your television.

3.Set the television to video mode according to the instructions in the owner’s manual. (This is usually channel 3, 4 or AV)

4. Turn the camera on by pressing the Power	fig.5.1
button.

5.Connect the other end of the cable into the VIDEO

port located underneath the cable connection panel. (fig.5.1)

41