Loading the Battery
The Concord
Loading the Battery:
1.Locate the battery door on the bottom of the camera.
2.Slide the battery door outwards, as indicated by the arrow and lift the battery door to open. (fig.1.1)
3.Insert the 3V (CR123) lithium battery with the positive terminal (+) toward the inside of the battery compartment.
4.Close the battery door, press down on it and slide it towards the center of the camera until it snaps into place.
fig.1.1 |
fig.1.2 |
Note: Take extra care in opening or closing the battery door so as to prevent the battery from falling out.
Checking the Battery
The camera has a battery indicator that shows the current battery level.
FULL
Battery is full and ready for use.
LOW
Battery is low in power and it needs to be replaced soon.
8
