Creative 2030 manual Configuring Settings, State box

Configuring Settings

The Link Quality and Signal Strength information appear only in the default Infrastructure mode, and not in Ad-hocmode.

1.If the Configuration Utility icon does not appear on the taskbar, click Start -> Programs (or All Programs)-> Network Blaster 2030-01-> Network Blaster Wireless LAN USB Adapter utility.

2.Double-click the Configuration Utility icon on the taskbar just near the clock (see Figure 4-1). The Configuration Utility dialog box similar to Figure 4-2appears.

3.Click the Link Info tab. The status of your wireless connection is displayed.

4.Click the Re-Scanbutton to locate and re-connect the network.

State box

Displays the MAC Address of the network device which is currently connected to your Wireless LAN USB adapter.

Current Channel box Displays the channel that the Wireless LAN USB Adapter is operating in.

Current Service Set Identifier box

Displays the SSID of the connected network device

Figure 4-2: Link Info tab

Configuring the Wireless LAN USB Adapter 4-2