5.When the dialog box similar to Figure 5-2appears, click the IP Address tab.

If you are using a Dynamic IP address, proceed to step 6. For users with a Static IP address, go to step 8.

6.Click the Obtain an IP address automatically option to select it and click the OK button.

7.Click the OK button.

8.When Windows prompts you to restart your computer, click the Yes button to restart your computer.

This completes the Ethernet configuration, therefore skip the remaining steps.

9.Click the Specify an IP Address option to select it.

10.Type the relevant information in the IP Address and Subnet Mask boxes, and then click the Gateway tab.

11.When the dialog box similar to Figure 5-3appears, type the new gateway address in the New gateway box, and then click the Add button.

12.Click the DNS Configuration tab

Figure 5-2

Figure 5-3

Configuring Your Computer’s Network Settings 5-3

Page 62
Image 62
Creative 2030 manual Click the Specify an IP Address option to select it