IP Sharing Functions | D-Link DVG-6008S specification

55

5. IP Sharing Functions

All Gateway series have a built-in IP sharing function. The settings and instructions at a PC end are described below:

Current Intranet only supports static IP mode, and the settings at the PC end are as follow: Available IP address Range : 192.168.8.1 – 192.168.8.253 (default address of Gateway is 192.168.8.254)

Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.8.254

The above values vary with different LAN Port Settings.

Assume Gateway’s LAN settings are,

IP address : 192.168.3.1

Subnet Mask

: 255.255.255.0

Then, the settings at PC end should be as follows:

Valid IP address range : 192.168.3.2 – 192.168.3.254

Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.3.1

WAN Port	LAN Port connected to
Connected to	Intranet
Internet

Image 57

D-Link DVG-6008S user manual IP Sharing Functions

Contents

DVG-6008S Voip Gateway Page Contents IP Sharing Functions Coding Principle Advanced Feature Product Overview Introduction Hardware Description Front Panel DVG-6008S Model Rear Panel Network Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Integrating Line Ports with PBX Telephone Interface Description Basic Settings of a Gateway PreparationIVR Interactive Voice Response Software Upgrades Save SettingsInstructions To inquire about current Gateway’s WAN Port IP address IVR Functions Table Function Code Description Example Function Code Description Example IP address Settings Static IP Settings Function Command Select a Static IPSubnet Mask Settings Default Gateway Settings PPPoE Account Settings Adsl PPPoE SettingsRecorded Voice File Select a PPPoE PPPoE Character Conversion Table Instructions Network Settings WANPage Setting Dynamic IP Dhcp IP Configuration Setting WAN PortSetting Static IP Adsl PPPoE Settings DNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT Traversal NAT/DDNS Ddns Prefix Number Rules Telephony SettingsExample For example Hotline Functions Example Description SIP 164 System Each line registers to Proxy independently FXO Representative number registers to Proxy Calling Features Advanced Options Line Settings Codec Fax SettingsPage Digit Map Speed Dial Phone Book CDR Settings Caller FilterACL for Management Transit Call Control Language Long Distance Exception Table Long-Distance Control Table Busy Tone Cadence Measurement CPT/Cadence SettingsUDT Detection CPT parameters Table Detailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Filling in the CPT Table Save Settings System Information RTP Packet Summary Stun InquiryPing Test Snmp Backup/Restore System Operations Save Settings Provision Settings Logout Software Upgrade IP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow Instruction End RIPRouting Information Protocol ※ Static Route※ IP Filtering Port filtering Virtual Server MAC Filtering Special Applications※ URL Filter※ DoS Prevention Settings※