Network Settings LAN, LAN interface mode※ | D-Link DVG-6008S

21

Network Settings (LAN)

LAN interface mode※

Router: The system serves as a router with NAT.

Bridge: The system serves as a bridge between WAN port and LAN port without NAT. (LAN default gateway will still be accessible for configuration).

LAN IP/Subnet mask

Gateway LAN Port IP address and the subnet mask value. Please note that Gateway is built with NAT: Gateway LAN Port IP address cannot be in the same section as the NAT LAN Port IP address, or else it is unable to make or receive calls. For example, if the NAT LAN Port IP address is 192.168.8.1, then Gateway LAN Port cannot be ranged between 192.168.8.1 ~ 192.168.8.254. If so, please change the LAN

Image 23

D-Link DVG-6008S user manual Network Settings LAN, LAN interface mode※, LAN IP/Subnet mask

Contents

DVG-6008S Voip Gateway Page Contents IP Sharing Functions Coding Principle Advanced Feature Product Overview Introduction Hardware Description Front Panel DVG-6008S Model Rear Panel Gateway in a NAT network Network InterfaceGateway Assigned with a Public IP Address Page Integrating Line Ports with PBX Telephone Interface Description IVR Interactive Voice Response Basic Settings of a GatewayPreparation To inquire about current Gateway’s WAN Port IP address Save SettingsSoftware Upgrades Instructions IVR Functions Table Function Code Description Example Function Code Description Example Default Gateway Settings Static IP Settings Function Command Select a Static IPIP address Settings Subnet Mask Settings Select a PPPoE Adsl PPPoE SettingsPPPoE Account Settings Recorded Voice File PPPoE Character Conversion Table Instructions Network Settings WANPage Adsl PPPoE Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Setting Static IP Clone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ Dhcp Settings LAN QoS※ QoS SettingsWAN QoS NAT Traversal NAT/DDNS Ddns For example Telephony SettingsPrefix Number Rules Example Hotline Functions Example Description SIP 164 System Each line registers to Proxy independently FXO Representative number registers to Proxy Calling Features Advanced Options Line Settings Codec Fax SettingsPage Digit Map Speed Dial Phone Book ACL for Management CDR SettingsCaller Filter Transit Call Control Language Long Distance Exception Table Long-Distance Control Table CPT parameters Table CPT/Cadence SettingsBusy Tone Cadence Measurement UDT Detection Detailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Filling in the CPT Table Save Settings System Information Ping Test RTP Packet SummaryStun Inquiry Snmp Backup/Restore System Operations Save Settings Provision Settings Logout Software Upgrade IP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow Instruction End RIPRouting Information Protocol ※ Static Route※ IP Filtering Port filtering Virtual Server MAC Filtering Special Applications※ URL Filter※ DoS Prevention Settings※