MAC Filtering, Virtual Server | D-Link DVG-6008S guide

MAC Filtering

MAC (Media Access Control) address filtering is to filter the transmission of data by network card physical address.

MAC: input MAC that will limit accessing Internet PC.

Virtual Server

Enabling the users on Internet to access the WWW, FTP and other services under your NAT. When remote user are accessing Web or FTP servers through WAN end IP address, it will be routed to the server at the internal LAN end and be routed to the server at the internal LAN end as appropriate in accordance with the externally required services

WAN Port Range: Input the port on the WAN side.

TCP/UDP: Select the communication protocols used by the server—TCP or UDP.

LAN Host IP Address: Input IP address that provides various services servers.

Server Port Range: Input the port used by the LAN host.

DMZ

Lets the server on the LAN to be directly exposed to the Internet for accessing data. Either this function or the virtual server can be selected for use.

Image 64

D-Link DVG-6008S user manual MAC Filtering, Virtual Server

Contents

DVG-6008S Voip Gateway Page Contents Advanced Feature IP Sharing Functions Coding Principle Introduction Product Overview Hardware Description Front Panel Rear Panel DVG-6008S Model Gateway Assigned with a Public IP Address Network InterfaceGateway in a NAT network Page Telephone Interface Description Integrating Line Ports with PBX Preparation Basic Settings of a GatewayIVR Interactive Voice Response Save Settings Software UpgradesInstructions To inquire about current Gateway’s WAN Port IP address IVR Functions Table Function Code Description Example Function Code Description Example Static IP Settings Function Command Select a Static IP IP address SettingsSubnet Mask Settings Default Gateway Settings Adsl PPPoE Settings PPPoE Account SettingsRecorded Voice File Select a PPPoE PPPoE Character Conversion Table Network Settings WAN InstructionsPage IP Configuration Setting WAN Port Setting Dynamic IP DhcpSetting Static IP Adsl PPPoE Settings BigPond for Australia use only DNS SettingsClone MAC Using Phone Books Manager LAN interface mode※ Network Settings LANLAN IP/Subnet mask Dhcp Settings WAN QoS QoS SettingsLAN QoS※ NAT/DDNS NAT Traversal Ddns Telephony Settings Prefix Number RulesExample For example Hotline Functions Example Description SIP 164 System FXO Representative number registers to Proxy Each line registers to Proxy independently Calling Features Advanced Options Line Settings Fax Settings CodecPage Digit Map Phone Book Speed Dial Caller Filter CDR SettingsACL for Management Language Transit Call Control Long-Distance Control Table Long Distance Exception Table CPT/Cadence Settings Busy Tone Cadence MeasurementUDT Detection CPT parameters Table Detailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Save Settings Filling in the CPT Table System Information Stun Inquiry RTP Packet SummaryPing Test Backup/Restore Snmp Provision Settings System Operations Save Settings Software Upgrade Logout IP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing Flow End Static Route※ RIPRouting Information Protocol ※ Port filtering IP Filtering MAC Filtering Virtual Server URL Filter※ Special Applications※ DoS Prevention Settings※