Dhcp Settings | D-Link DVG-6008S guide

port IP address, (e.g. setting the IP address to 192.168.99.254.)

DHCP Settings

Enable DHCP Server: Enable or Disable DHCP server service of gateway.

IP Pool Starting Address: The first IP address to be assigned to DHCP clients.

IP Pool ending Address: The last IP address to be assigned to DHCP clients.

Lease Time: The valid period of an assigned IP address.

Domain Name Server Assignment: The DNS information to be assigned to DHCP clients.

Auto	: Assigns the same DNS information of WAN port to the DHCP clients.
Manual	: Manually assigns the DNS information for DHCP clients.

Port of Web Access from WAN: Http port for WAN. To make this setting, the LAN Port must be used. WAN Port cannot make this setting. Always use port 80 when connecting to LAN port. 0 is to disable http port for WAN.

Enable Web UI: It disables any access from WAN and LAN if ticked.

Enable Telnet Service: It allows user to make settings from Telnet.

Image 24

D-Link DVG-6008S user manual Dhcp Settings

Contents

DVG-6008S Voip Gateway Page Contents Advanced Feature IP Sharing Functions Coding Principle Introduction Product Overview Hardware Description Front Panel Rear Panel DVG-6008S Model Network Interface Gateway Assigned with a Public IP AddressGateway in a NAT network Page Telephone Interface Description Integrating Line Ports with PBX Basic Settings of a Gateway PreparationIVR Interactive Voice Response Save Settings Software UpgradesInstructions To inquire about current Gateway’s WAN Port IP address IVR Functions Table Function Code Description Example Function Code Description Example Static IP Settings Function Command Select a Static IP IP address SettingsSubnet Mask Settings Default Gateway Settings Adsl PPPoE Settings PPPoE Account SettingsRecorded Voice File Select a PPPoE PPPoE Character Conversion Table Network Settings WAN InstructionsPage IP Configuration Setting WAN Port Setting Dynamic IP DhcpSetting Static IP Adsl PPPoE Settings DNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask Dhcp Settings QoS Settings WAN QoSLAN QoS※ NAT/DDNS NAT Traversal Ddns Telephony Settings Prefix Number RulesExample For example Hotline Functions Example Description SIP 164 System FXO Representative number registers to Proxy Each line registers to Proxy independently Calling Features Advanced Options Line Settings Fax Settings CodecPage Digit Map Phone Book Speed Dial CDR Settings Caller FilterACL for Management Language Transit Call Control Long-Distance Control Table Long Distance Exception Table CPT/Cadence Settings Busy Tone Cadence MeasurementUDT Detection CPT parameters Table Detailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Save Settings Filling in the CPT Table System Information RTP Packet Summary Stun InquiryPing Test Backup/Restore Snmp Provision Settings System Operations Save Settings Software Upgrade Logout IP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing Flow End Static Route※ RIPRouting Information Protocol ※ Port filtering IP Filtering MAC Filtering Virtual Server URL Filter※ Special Applications※ DoS Prevention Settings※