Static Route※, RIPRouting Information Protocol ※ | D-Link DVG-6008S

7. Advanced Feature

Static Route※

Build static routes within an internal network. These routes will not apply to the Internet.

Route: Enter the IP of the specified network.

Route Mask: Enter the subnet mask to be used for the specified network.

Next Hop IP: Enter the IP address to the specified network.

Inter Face: Select the inter face.

RIP(Routing Information Protocol) ※

Establish dynamic routes within an internal network. These routes will not apply to the Internet.

Enable Authentication/Authentication Password: All the boxes in this RIP group should be filled in the same password if ticked.

Image 62

D-Link DVG-6008S user manual Static Route※, RIPRouting Information Protocol ※

Contents

DVG-6008S Voip Gateway Page Contents Advanced Feature IP Sharing Functions Coding Principle Introduction Product Overview Hardware Description Front Panel Rear Panel DVG-6008S Model Gateway in a NAT network Network InterfaceGateway Assigned with a Public IP Address Page Telephone Interface Description Integrating Line Ports with PBX IVR Interactive Voice Response Basic Settings of a GatewayPreparation Instructions Save SettingsSoftware Upgrades To inquire about current Gateway’s WAN Port IP address IVR Functions Table Function Code Description Example Function Code Description Example Subnet Mask Settings Static IP Settings Function Command Select a Static IPIP address Settings Default Gateway Settings Recorded Voice File Adsl PPPoE SettingsPPPoE Account Settings Select a PPPoE PPPoE Character Conversion Table Network Settings WAN InstructionsPage Setting Static IP IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Adsl PPPoE Settings Clone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ Dhcp Settings LAN QoS※ QoS SettingsWAN QoS NAT/DDNS NAT Traversal Ddns Example Telephony SettingsPrefix Number Rules For example Hotline Functions Example Description SIP 164 System FXO Representative number registers to Proxy Each line registers to Proxy independently Calling Features Advanced Options Line Settings Fax Settings CodecPage Digit Map Phone Book Speed Dial ACL for Management CDR SettingsCaller Filter Language Transit Call Control Long-Distance Control Table Long Distance Exception Table UDT Detection CPT/Cadence SettingsBusy Tone Cadence Measurement CPT parameters Table Detailed description is given below Direct Connection to Pstn Connected to a PBX Extension Line Page Save Settings Filling in the CPT Table System Information Ping Test RTP Packet SummaryStun Inquiry Backup/Restore Snmp Provision Settings System Operations Save Settings Software Upgrade Logout IP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing Flow End Static Route※ RIPRouting Information Protocol ※ Port filtering IP Filtering MAC Filtering Virtual Server URL Filter※ Special Applications※ DoS Prevention Settings※