Disc Media Operation
4You can change the disc status by selecting ‘Yes‘ by using [œ/√] and press [OK]. The ‘Changing Disc Status’ bar will appear. This process takes a few seconds.
5After the process is finished, the recorder goes to the ‘Information’ menu automatically.
Edit Disc Name
You can rename your disc to any name you choose. The default disc name is ‘MY DVD‘.
1Press [DISC OP] to go to ‘Disc Operation’ mode.
2Use [œ/√] to select ‘Edit Disc Name‘ menu. Then press […] or [†].
3If you want to change the disc name, select ‘Yes‘ by using [œ/√] and pressing [OK].
If ‘Lock Disc’ is set to ‘Yes’ in the DISC Operation menu, you cannot rename your disc; see page 56.
Finalise Disc (DVD-RW, DVD±R)
Finalising a DVD±R (or
1Press [DISC OP] to go to ‘Disc Operation’ mode.
2Use [œ/√] to select ‘Finalise Disc‘ menu for a DVD±R (or
3Use [œ/√] to select ‘Yes‘. Press [OK] to make the disc compatible.
4After the process is finished, the recorder goes to the ‘Information’ menu automatically.
Disc Operation
Do you want to edit the disc | œ Yes √ |
name? |
|
Edit Disc Title
MY DVD
Save 
Cancel
4The Keyboard Menu appears.
5Use [œ √…†] to select and press [OK] to enter the name of the disc.
•On the remote control
œ, √, …,† : Moves the cursor to the desired position.
OK: enter the name
•On the typing screen CLEAR: Clear all
BACK: Clears the last character.
6Press [RED] to save.
Disc Operation
Are you sure you want to finalise œ Yes √ this disc?
Press <OK> To Confirm.
• Once you have finalised a DVD±R (or
• It may take over 7 minutes for finalising the edited disc, you must wait till the set finishes the finalising operation.
EDITING
57
