Initial Installation
After successfully connecting your
You must follow the initial installation process to set the time, date, channels, and language preferences for the
1Switch on your DVD recorder. An ‘Auto Tune’ message is displayed on the screen. Press the [RED] button to start auto tune.
2The
3After finishing Auto Channel Search, save the settings by pressing the [GREEN] button.
4If you cancel the process during Initial Installation, you should repeat this procedure.
Re-Installation
1 | Press [SETUP] and select the 'Restore Default | CONNECTIONS |
3 | Repeat the steps 1~3 opposite. | |
| Settings' using […/†/œ /√]. Then select |
|
| ‘YES’ to reset the set (see page 36). |
|
2 | Power On, then you will see the 'Initial |
|
| Installation'. |
|
|
|
|
|
| SETUP |
|
|
|
21