IBM 4683/84 • 4693/94 Port 5B Interface Selection

Scan this label to enable the IBM 468x Port 5B interface.

IBM 4683/84 • 4693/94 Port 5B Settings

Data Format: Send As Code 39 — converts bar code data (UPC/EAN, add-ons, Code 93, Codabar, MSI/Plessey and Code 128) into Code 39 format before sending the data to the host.

These settings are for IBM 4683/84 • 4693/94 Port 5B interface ONLY.

Limit Command Set — is an option that causes the scanner to ignore 'enable scanner' and 'disable scanner' commands sent from the host.

Transmit Unsolicited Status1 — when enabled, this option causes the scanner to transmit a status message to the host upon receipt of an "SNRM".

SET

DATA FORMAT

----------------------------------------------

SEND AS CODE 39 ----------------

DON'T SEND AS CODE 39 --------

ENABLE LIMIT COMMAND SET -----

DISABLE LIMIT COMMAND SET -----

TRANSMIT UNSOLICITED STATUS ---

DON'T TRANSMIT UNSOLICITED STATUS ---

END ----------------------------------------------

1 For this IBM interface, the setting for Unsolicited Status is normally Enabled.

Programming Guide

9

Page 13
Image 13
Datalogic Scanning 6000 PLUS manual IBM 4683/84 4693/94 Port 5B Interface Selection, Send AS Code Dont Send AS Code, End