Datalogic Scanning 6000 PLUS manual Setting Symbology Specific Label Identifiers Label I.D

Setting Symbology Specific Label Identifiers (Label I.D.) (Continued)

4. Scan the label representing the symbology whose label identifier you wish to modify.

In our example, we would scan the 'UPC-A' symbology label.

5. Identify and scan the digits that correspond to the Hex Values.

The hex values from the ASCII chart that correspond to 'A1' from our example are as follows: 41hex = 'A', and 31hex = '1'. Thus, we would scan digit programming labels in this order: 4, 1, 3, 1.

6. Scan the END label.

In our example, you have changed the default label identifier prefix for UPC-A from 'A' to 'A1'.

SET ----------------------------------------------

DISABLE LABEL I.D. CONTROL -------

TRANSMIT LABEL I.D. AS PREFIX -----

TRANSMIT LABEL I.D. AS SUFFIX -----

40 QuickScan 6000/6000 Plus