PC Keyboard Wedge –
Connect to a Laptop/No Keyboard Attached
If no keyboard is attached, the scanner must provide the acknowledge signal to the PC. In this case, enable the "Laptop/No External Keyboard" mode. If a keyboard is attached, enable "Keyboard Attached".
Laptop (integrated keyboard) — scan the "Laptop/No External Key- board" label below when the scanner is connected to a laptop computer or when the scanner is operated with no external keyboard attached.
PC (external keyboard) — if you move the scanner to a standard PC, change the setting to "Keyboard Attached".
Send Control Characters — when this feature is disabled, all ASCII characters except NUL (00h) are transmitted. Enabling this feature limits transmission of ASCII characters to the following:
•Only ASCII characters between 20h..127h, plus…
-Carriage Return (CR=0Dh)
-BackSpace (BS=08h)
-Right Tab (HT=09h)
-Left Tab (0Bh)
-Esc (1Bh)
SET ----------------------------------------------
TO | PC |
CONNECT | APTOP OR |
| L |
SEND CONTROL | CHARACTERS |
|
|
LAPTOP/NO EXTERNAL KEYBOARD -
KEYBOARD ATTACHED --------------
ENABLE -----------------------------
DISABLE -----------------------------
END ----------------------------------------------
26 | QuickScan 6000/6000 Plus |
