Codabar Start/Stop Character
These bar codes allow you to set the Start/Stop character format and trans- mission. Refer to your host user's manual to identify your system require- ments, then use these labels to select which characters are transmitted.
SET
START/STOP FORMAT & TRANSMISSION SPECIFICATIONS
MATCH NOT REQUIRED
MATCH REQUIRED
DON'T TRANSMIT
TRANSMIT1
FORMAT = ABCD/TN*E
FORMAT = abcd/tn*e
FORMAT = ABCD/ABCD -------
FORMAT = abcd/abcd -----------
END ----------------------------------------------
1Choosing Transmit Start/Stop characters requires selecting one of these four data format selections: ABCD/TN*E, abcd, tn*e, ABCD/ABCD, or abcd/abcd. Refer to Appendix A, Standard Factory Settings, to identify the default setting for your scanner's interface type.
74 | QuickScan 6000/6000 Plus |
