Code 39 Options
The Code 39 symbology has the following programmable features:
Check Digit — calculates the Check Digit to verify that the Check Digit contained in the bar code label is correct. If you enable this feature, your bar codes must contain a Check Digit.
You may also choose to transmit or not transmit the Check Digit independent of whether the Check Digit is calculated by the scanner. If you choose to Transmit Check Digit, but not calculate, the scanner sends the Check Digit encoded in the bar code without verifying its accuracy. If you choose Don't Transmit Check Digit, the scanner will remove the Check Digit's contents before sending the bar code data to the host.
Start/Stop Characters — you can choose either Send or Don't Send depending on your host's interface requirement.
Code 39 Full ASCII — enables or disable the ability to decode Code 39 Full ASCII labels.
Code 39 Minimum Label Length — sets the minimum label length required for Code 39 labels (not including the check character). This feature is provided to ignore small label segments, reducing the possibility that a portion of a good label is incorrectly seen as an entire label.
58 | QuickScan 6000/6000 Plus |
