System Unit Cover
securing | front of system unit |
button |
|
Figure 4-2. System-Unit Cover Removal
To remove the system unit cover, follow these steps:
1. Remove the padlock if one is installed.
back of system unit
Figure 4-3. Padlock Removal
2.Press in the two securing buttons until the cover is free to swing up.
3.Lift the cover, from the back, pivoting it toward the front of the system unit.
Four plastic hooks on the inside of the front part of the cover secure it to the chassis.
Before you reinstall the cover, fold all cables out of the way so that they do not interfere with the cover or with the proper airflow inside the system unit.
