Dell 100-Mbps manual Table A-1. System Setup Categories

Table A-1. System Setup Categories

Category	Function
Time	Resets time on system’s internal clock.
Date	Resets date on system’s internal calendar.
Diskette Drive A	Identifies type of diskette drives installed. Cat-
Diskette Drive B	egory options always match physical locations
	of drives in system unit. Tape drives are not
	reflected in these categories.
Drive A Location	Identifies which diskette drive is used as the
	boot drive.
Drives:	Identifies drives attached to the IDE1 and
Primary	IDE2 connectors on system board. Each EIDE
Secondary	connector supports two EIDE drives (Drive 0
	and Drive 1).
	For EIDE hard-disk drives, the system pro-
	vides an automatic drive-type detect feature.
	To use this feature, highlight the appropriate
	drive category and type a (for automatic).
	If none of the supported drive types match the
	parameters of the new drive, enter the parame-
	ters directly. To do so, highlight the
	appropriate drive category (Drive 0 and Drive 1)
	and type u to display User1. Press <Tab> to
	highlight each of the parameter fields in suc-
	cession, and enter the appropriate number for
	each field.
	NOTE: For EIDE devices such as EIDE
	CD-ROM drives and EIDE tape drives that are
	using the built-in EIDE controller, set the
	appropriate Drive category to Auto.
Base Memory	Displays amount of memory available to
	MS-DOS programs that do not use extended or
	expanded memory.
Extended Memory	Displays amount of memory available as
	extended memory.

System Setup Program A-3