Dell 100-Mbps manual Hard-Disk Drives, Lift the hard-disk drive bracket out of the system unit

Hard-Disk Drives

handle

screw

hook (2)

hard-disk drive bracket

Figure 4-11. Hard-Disk Drive Bracket Removal

To remove a hard-disk drive bracket, follow these steps:

1.Disconnect the DC power cable(s) and the interface cable(s) from the back of the drive(s).

2.Remove the screw that secures the hard-disk drive bracket to the chassis.

3.Grasp the handle on the front of the bracket, and rotate the bracket back until it swings free from the chassis.

Disengage the bracket from the two hooks on the bottom of the chassis support.

4.Lift the hard-disk drive bracket out of the system unit.

4-12 Dell OptiPlex GXpro Systems Service Manual