53 Replacing the Speakers

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the screws holes on the speakers with the screw holes on the computer base.

2Replace the screws that secure the speakers to the computer base.

3Route the speaker cable through the routing guides and connect the speaker cable to the system board.

Postrequisites

1Replace the inner frame. See "Replacing the Inner Frame" on page 97.

2Replace the trim cover. See "Replacing the Trim Cover" on page 89.

3Replace the system-board shield. See "Replacing the System-Board Shield" on page 33.

4Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the Speakers

117

Page 117
Image 117
Dell 2710 owner manual Replacing the Speakers