Replacing the mSATA Mini-Card | 73
31 Replacing the mSATA Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1Align the notch on the mSATA mini-card with the tab on the mSATA
mini-card connector.
2Insert the mSATA mini-card at a 45-degree angle into the mSATA
mini-card connector.
3Replace the screws that secure the mSATA mini-card to the system board.
Postrequisites
1Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
2Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 73 Friday, April 27, 2012 3:23 PM