Dell 2710 owner manual Replacing the Processor Heat-Sink Fan

33 Replacing the Processor Heat-Sink Fan

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the screw holes on the processor heat-sink fan with the screw holes on the computer base and replace the screws that secure the processor heat-sink fan to the computer base.

2Connect the processor heat-sink fan cable to the system board.

Postrequisites

1Replace the system-board shield. See "Replacing the System-Board Shield" on page 33.

2Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the Processor Heat-Sink Fan 77