27 Replacing the TV-Tuner Mini-Card

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the notch on the TV-tuner mini-card with the tab on the TV-tuner mini-card connector.

2Insert the TV-tuner mini-card at a 45-degree angle into the TV-tuner mini-card connector.

3Press the outer end of the TV-tuner mini-card down and replace the screws that secure the TV-tuner mini-card to the system board.

4Connect the TV-in port cable to the TV-tuner mini-card.

Postrequisites

1Replace the system-board shield. See "Replacing the System-Board Shield" on page 33.

2Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the TV-Tuner Mini-Card

65

Page 65
Image 65
Dell 2710 owner manual Replacing the TV-Tuner Mini-Card