Dell 2710 owner manual Replacing the Memory Modules

15 Replacing the Memory Module(s)

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the notch on the memory module with the tab on the memory-module connector.

2Slide the memory module firmly into the connector at a 45-degree angle and press the memory module down until it clicks into place.

If you do not hear the click, remove the memory module and reinstall it.

23

1

1 tab 2 memory-module connector

3memory module

3Slide the memory-module shield on the system-board shield and replace the screw that secures the memory-module shield to the system-board shield.

Postrequisites

1Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the Memory Module(s) 41