32 Removing the Processor Heat-Sink Fan

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Prerequisites

1Remove the back cover. See "Removing the Back Cover" on page 19.

2Remove the system-board shield. See "Removing the System-Board Shield" on page 31.

Procedure

1Disconnect the processor heat-sink fan cable from the system board.

2Remove the screws that secure the processor heat-sink fan to the computer base.

3Lift the processor heat-sink fan off the computer base.

1

2

3

1

processor heat-sink fan

2

screw (3)

3processor heat-sink fan cable

Removing the Processor Heat-Sink Fan

75

Page 75
Image 75
Dell 2710 owner manual Removing the Processor Heat-Sink Fan