Dell 4300 manual DELL CONFIDENTIAL - PRELIMINARY 11/20/01

2H930bk1.book Page 71 Tuesday, November 20, 2001 5:02 PM

7Ensure that the card is fully seated in the connector.

not fully seated

fully seated

bracket caught outside of slot

bracket within slot

back of computer

8Lower the plastic securing lever.

9Connect any cables that should be attached to the card.

See the card documentation for information about the card cable connections.

10Close the computer cover (see page 87).

11Connect your computer and devices to their electrical outlets, and turn them on.

NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.

12Install any drivers required for the card as described in the card documentation.

DELL CONFIDENTIAL – PRELIMINARY 11/20/01

Adding Parts

71