Dell 4300 manual DELL CONFIDENTIAL - PRELIMINARY 11/20/01, Close the computer cover see page

2H930bk1.book Page 75 Tuesday, November 20, 2001 5:02 PM

6To insert a module, press out the securing clip at each end of the memory module connector.

memory module connectors

securing clips (2) notches (2)

memory module

connector

cutouts (2)

step 6

step 7

step 8

7Align the notches on the bottom of the module with the crossbars in the connector.

NOTICE: To avoid breaking the memory module, do not press near the middle of the module.

8Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

9Close the computer cover (see page 87).

10Connect your computer and devices to their electrical outlets, and turn them on.

DELL CONFIDENTIAL – PRELIMINARY 11/20/01

Adding Parts

75