Dell 4300 manual DELL CONFIDENTIAL - PRELIMINARY 11/20/01

2H930bk1.book Page 73 Tuesday, November 20, 2001 5:02 PM

7To remove the card, grasp the card by the top corners and lift it out.

If the card is difficult to remove, gently ease the card back and forth to remove it from the connector.

card

securing lever

slot connector

system board

filler bracket in empty card-slot opening

back of computer

8If you are not replacing the card, install a filler bracket in the empty card-slot opening.

If you are adding a card, see page 69.

9Lower the securing lever.

10Close the computer cover (see page 87).

11Connect your computer and devices to their electrical outlets, and turn them on.

NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.

HINT: The AGP card is removed from the following illustration to provide a better view of the inside of your computer.

HINT: Installing filler brackets over empty card- slot openings is necessary to maintain Federal Communications Commission (FCC) certification of the computer. The brackets also keep dust and dirt out of your computer.

DELL CONFIDENTIAL – PRELIMINARY 11/20/01

Adding Parts

73