Installing System Components 73
NOTE: The memory module socket has an alignment key that allows you to
install the memory module in the socket in only one way.
4
Press down on the memory module with your thumbs until the ejectors
lock into position. See Figure3-10.
When the memory module is properly seated in the socket, the ejectors on
the memory module socket align with the ejectors on the other sockets
that have memory modules installed.
5
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page61.
6
Close the system. See "Closing the System" on page59.
7
Reconnect your system and peripherals to their electrical outlets,
and turn on the system.
8
Start up the system, press <F2> to enter the System Setup program,
andcheck the
System Memory
settings on the main System Setup screen.
The system should have already changed the value to reflect the newly
installed memory.
9
If the value is incorrect, one or more of the memory modules may not be
installed properly. Repeat step3 through step 8 of this procedure, checking
to ensure that the memory modules are firmly seated in their sockets.
book.book Page 73 Monday, April 12, 2010 3:38 PM