76 Installing System Components
Figure 3-12. Removing and Installing the Expansion-Card Riser
Installing the Expansion-Card Riser CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
1
Replace the expansion-card riser in the expansion-card riser assembly and
secure it using the four screws. See Figure3-12.
2
Align the expansion-card riser assembly with the connector on the system
board. SeeFigure 3-11.
3
Seat the expansion-card riser assembly firmly on the system board.
4
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page61.
1 expansion-card riser assembly 2 expansion-card riser
3 screws (4)
3
2
1
book.book Page 76 Monday, April 12, 2010 3:38 PM