Dell C2100 - page 100

100 Installing System Components
5 Disconnect the LED signal cable from the front panel connector on the
system board. See Figure5-3.
6 Remove the screw securing the LED panel cover to the chassis and slide
the cover out. See Figure3-24.
7 Remove the two screws securing the control panel assembly to the chassis.
See Figure3-24.
8 Remove the control panel assembly.
Figure 3-24. Removing the Control Panel Assembly
1 cable cover 2 chassis
3 front LED board 4 screws (3)
5 front LED cover
2
4
53
1
book.book Page 100 Monday, April 12, 2010 3:38 PM