104 Installing System Components
9Loosen the ten screws securing the system board, and then slide the
board toward the front, up and out of the system. See Figure3-26.
Figure 3-26. Removing and Installing the System Board
Installing the System Board
1
Align the holes A and B on the system board to position the board correctly
in the system.
2
Replace the ten screws to secure the system board in place.
3
Reconnect the power, SATA, and front panel cables to the system board.
See "System Board Connectors" on page125.
1 screws (10) 2 system board assembly
12
book.book Page 104 Monday, April 12, 2010 3:38 PM