Back to Contents Page

Disk Drives and Media

Dell™ OptiPlex™ GX400 Service Manual

Drive Location

Removing the Floppy Drive

Replacing the Floppy Drive

Removing a CD, Zip, or Other External Drive

Replacing a CD, Zip, or Other External Drive

Removing a Hard Drive

Replacing a Hard Drive

Drive Location

Drive Locations

Removing the Floppy Drive

CAUTION: Before you perform this procedure, see "Precautionary Measures."

NOTICE: Before disconnecting a device from the computer or removing a component from the system board, verify that the standby power light on the system board has turned off. To locate this light, see "System Board Components."

1.Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover.

2.Rotate the power supply away from the system board.

3.Remove the front panel.

4.Disconnect the DC power and interface cables from the back of the drive.

Page 11
Image 11
Dell GX400 manual Disk Drives and Media, Drive Location, Removing the Floppy Drive