Back to Contents Page
Expansion Cards
Dell™ OptiPlex™ GX400 Service Manual
Expansion Card Types
Removing an Expansion Card
Expansion Card Types
•Up to five
•One
Expansion Card Types
Removing an Expansion Card
CAUTION: Before you perform this procedure, see "Precautionary Measures."
NOTICE: Before disconnecting a device from the computer or removing a component from the system board, verify that the standby power light on the system board has turned off. To locate this light, see "System Board Components."
1.Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover.
2.Lay the computer on its right side.
3.Remove the AGP card brace.
If you have an AGP card clip, disconnect any cables attached to the card and press the AGP card clip lever toward the
NOTE: Do not remove the video card retention clip from the expansion card slot.
AGP Card Clip